Yokogawa DA100 Manuel d'utilisateur télécharger pdf (Page 45)

IM DA100-11E

5-3

Command Format

5.2 Command Syntax

In this manual, each command is explained as shown below.

SD Set date & time.

Mode Operation mode

Set SDp1, p2<terminator>

p1 year, month, day

p2 hour, min., sec.

Ex. Set the clock inside the DA to July 1, ’96, 13:00:00

SD96/07/01, 13:00:00

Comments • The formats of p1 and p2 are fixed to 8 characters.

Set them in the following manner.

p1=YY/MM/DD

p2=HH:MM:SS

Command function

Command

Effective command mode

Command syntax

Parameter description

Example of setting

Explanation of the way to

use and remarks in more detail

Mode

There are the following three modes in the DA100.

• Operation (measurement) mode

Mode to perform normal operation (measurement).

• Setup mode

Mode to set the basic specifications for the DA100.

To confirm the settings, execute the XESTORE command. See the description for the XE

command.

• A/D calibration mode

Mode to execute calibration of the A/D module.

Each mode is selected by the DS command. For details, see DS Command on page 6-10.

Also in each mode, commands and parameters that can be set and parameters that can be output

differ. See the description for each command.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 104 105

Pas de commentaire

Yokogawa DA100 Manuel d'utilisateur Page 45