Yokogawa DA100 Manuel d'utilisateur télécharger pdf (Page 11)

IM DA100-11E

2-1

Overview and Specifications of RS-232-C Interface

2.1 Description of Functions (RS-232-C)

Listener and Talker Functions

Listener Function

This allows almost all settings except power on/off and operation control.

• Settings except communication settings.

• Operation control except power on/off.

• Call-up of setting data

• Specifying of output data (specifying of channel numbers or output data types)

Talker Function

The following data can be output:

• Measured data

• Report data

• Data for relay condition

• System configuration

• Data for operation mode setting

• Data for setup mode setting

For measured data, either binary output or ASCII output can be selected. Report data and data for

relay condition are output in binary format. Other data are output in the form of ASCII data.

Data Output

When trigger(GET) becomes activated DA100 will store the new data in a buffer. When an output

request such as the FM command is received, these new data will be output.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 104 105

Pas de commentaire

Yokogawa DA100 Manuel d'utilisateur Page 11