Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur télécharger pdf (Page 39)

3-23

M-4659

Configuring the DX1000/DX2000

Index

Message

Enter a message to be written to the group of up to 32 alphanumeric characters.

Timer

Changes the upper/lower display area

Timer used by event action. Used also in the TLOG computation of the computation

function.

Up to four timers (1 to 4) can be set.

WhenUsinganAbsoluteTimer

• Mode

Select [Absolute].

• Timeinterval

Select the interval from the available settings between 1min to 24h.

• Ref.time

Set the time in the range of hour 0 to hour 23.

WhenUsingaRelativeTimer

• Mode

Select [Relative].

• Timeinterval

Set in the range from 00:01 (1 min.) to 24:00 (24 hours).

Hour: Set in the range from 0 to 24.

Min: Set in the range from 0 to 59.

• ResetatMathStart

ON Resets the timer when computation is started. The resetting of the timer is not

considered to be a timeout. Even if the timer is used as an event, the action is

not executed.

3.5 Entering General Settings

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 285 286

Pas de commentaire

Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur Page 39