Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur télécharger pdf (Page 162)

6-47

M-4659

Configuring the MV1000/MV2000

Index

E-mail

Basic Setting

Set the SMTP server and mail address.

• SMTP server name

Enter the host name or IP address of the SMTP server.

• Port No.

Unless specied otherwise, set the number to the default value. The default value is 25.

• Security

Settings Description

OFF Disables POP before SMTP.

POPbeforeSMTP Enables POP before SMTP.

• Address 1, Address 2

Enter the e-mail address. Multiple e-mail addresses can be entered in the box of one

recipient. When entering multiple addresses, delimit each address with a space. Up

to 150 characters can be entered.

• Sender

Enter the sender e-mail address. You can enter up to 64 characters.

POP3 Settings

If you need to use POP before SMTP, specify the POP3 server.

• POP3Servername

Enter the host name or IP address of the POP3 server.

• Portnumber

Unless specied otherwise, set the number to the default value. The default value is

110.

• Loginname

Enter the POP3 server login name.

• Password

Enter the POP3 server login password. You can enter up to 32 characters.

• Senddelay[second]

Enter the wait time from POP3 server authentication until transmission. Set a value in

the range of 0 to 10 (seconds).

6.6 Entering Basic Settings

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 285 286

Pas de commentaire

Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur Page 162