Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur télécharger pdf (Page 222)

7-48

M-4659

Copying and Pasting Setup Data

You can copy the setup data of one channel or more to other channels. Use the following

procedure to copy and paste.

1. Click the source channel number that you want to copy. To select many channels,

click the rst source channel, then drag over all the channels that you want to copy.

2. Click the [Copy] button at the bottom left of the window.

3. Click the destination channel number. To select many channels, click the rst

destination channel, then drag over all the channels where you want to paste.

4. Click the [Paste] button.

You can also copy and paste specific channel items.

After selecting the copy source in step 1, click the [Copy Details] button to display the

[Setup Channel Copy Details] dialog box.

Select the items that you want to copy.

Key Lock/Login

Click here. (Or choose the [Setting] menu - [SETUP [Basic] Setting] - [Setting].)

Select to use login, auto logout,or user ID.

Turn ON to use the user setting.

Key Lock Setting

Key Lock

When using the key lock function, select whether or not to activate the key lock function

(lock or free). For details, refer to the CX User’s Manual (IM 04L31A01-01E or IM

04L31A01-03E).

Password

Enter the password used to release the key lock using up to six characters. [???] is

displayed after the password is entered.

Use Login

To use the login, auto-logout, or user ID, select the appropriate items.

Auto Logout

Selected: If idle for ten minutes, logs out automatically.

Clear: Requires the logout procedure to log out.

7.7 Basic Measurement Function Basic Settings

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 285 286

Pas de commentaire

Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur Page 222