Yokogawa Standalone MW100 Manuel d'utilisateur télécharger pdf (Page 22)

In this example, the ―BOOTP‖ function is not used and the IP address and Subnet mask are fixed. Enter the IP address

and subnet mask for the SLC 5/05. Enter other network information (Gateway, Domain Name, etc.) as required. Other

settings such as ―Msg Connection Timeout‖ are left at default values. These should be reviewed and set per the

application requirements. When settings are completed, click ―OK‖. The SLC 5/05’s Ethernet configuration is now

complete.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Pas de commentaire

Yokogawa Standalone MW100 Manuel d'utilisateur Page 22