Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur télécharger pdf (Page 27)

IM 04L31A01-02E

Displaying the Trend of PV, SP, and OUT Values

Below are the procedures for displaying the trends of PV, SP, and OUT of loop 1 on the

trend display of group number 1 (group name: GROUP 1).

From the operation display, open the Group set, Trip line setting display according to

the following procedure.

Press the MENU key (to switch to Setting mode (Control)) and then the MENU key

(switch to Set mode). Press the #4 soft key (to select Display) and then the #1 soft

key (to select Group set, Trip line).

Menu (Setting mode (Control))

Menu (Setting mode)

Press the arrow keys to move the cursor (blue) to the Channel setting box.

Press the Input soft key to open the channel input pop-up window.

Use the Character/Number key and soft keys to select the channels to include in

the group.

In this group setting, the PV, SP, and OUT of loop 1 are assigned channel numbers

101, 102, and 103, respectively. To include PV, SP, and OUT of loop 1, enter 101-

103 or 101.102.103.

Enter 101-103

Select 1

Channel input

pop-up window

Press the DISP/ENTER key to confirm the entry.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 58 59

Pas de commentaire

Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur Page 27