Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur télécharger pdf (Page 40)

2-28

IM04L41B01-65EN

Setting the Serial Communication

• Data Length

Select the data length from the following list. Make sure to select 8 bits when

outputting data in binary format.

• RS232 Handshaking

Select the handshaking method from the following list. This setting is valid only for the

RS-232 interface.

• RS-422A/485 Address

 Selecttheaddressfrom1to32.ThissettingisvalidfortheRS-422A/485interface

and the Modbus protocol.

• RS-422A/485 Protocol

OFF: Serial communication is disabled.

 NORMAL:Setting/measurementserver

MODBUS: Modbus slave

MODBUS MASTER: Modbus master

 BARCODE:Barcodeinput

2.6 Configuring the System Mode

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 54 55

Pas de commentaire

Yokogawa Data Acquisition with PID Control CX2000 Manuel d'utilisateur Page 40