Yokogawa ADMAG AXF Manuel d'utilisateur télécharger pdf (Page 25)

IM 1E10C1-E

5-6

5. FUNCTION AND DATA SETTINGS

5.3 Setting Meter Factor

The meter factor is engraved on the data plate of the combined flow tube.

Switch Operation Display Description

SET SHIFT INC

SET SHIFT INCSET SHIFT INC

SET SHIFT INC

Change the display into the setting mode through the password

input mode. (Please refer to Chapter 4 “BASIC OPERATION

PROCEDURES.”)

By touching the SHIFT and INC key, select the parameter No.

“b08”.

By touching the SET key, change the display into the data

changing mode.

By touching the SHIFT key twice, the cursor moves to the next

digit.

By touching the INC key, change “0” into “1”.

By touching the SHIFT key, the cursor moves to the next digit.

By touching the INC key, change “0” into “2”.

By touching the SET key twice, the setting is completed.

By touching the SET key again, the display goes back to the

number changing mode.

Defalt is set as 1.0000. Below is an example to set it “1.1200”.

(Setting is now completed)

(See 4.2.1 The initial

procedure to change the

display)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 106 107

Pas de commentaire

Yokogawa ADMAG AXF Manuel d'utilisateur Page 25