Yokogawa JUXTA M Series Digital Limit Alarms MVTK Manuel d'utilisateur télécharger pdf (Page 25)

3-11

IM 77J04J11-01E 1st Edition : 2006.08.25-00

BRS Specifies I relays to be monitored on a bit-by-bit basis

● Function

Specifies the I-relay numbers to be monitored on a bit-by-bit basis. Note that this com-

mand simply specifies I relays. Actual monitoring is performed by the BRM command after

the I relay numbers are specified by this command.

When the volume of data is large and you wish to increase the baud rate, it is effective to

use a combination of the BRS and BRM commands rather than just the BRR command.

If the power supply is turned off, the specified I-relay numbers will be erased.

• The number of I relays to be specified at a time is 1 to 32.

• For the format of response in the event of failure, see subsection 3.1.2.

• The command shown below includes the checksum function.

When performing communication without checksum, do not include the 2-byte

checksum element in the command.

● Command/Response (for normal operation)

Number of Bytes 1 2 2 1 3 2 5 1 5 1

Command

element

STX Address

number

(ADR)

CPU

number

0 Number

of bits

(n)

I relay

number 1

BRS Comma

or space

I relay

number 2

Comma

or space

Command (continued)

• • •

5211

• • • I relay

number n

Checksum ETX CR

12 22 2 11Number of Bytes

Response

element

STX Address

number

(ADR)

CPU

number

OK Checksum ETX CR

● Example:

Specifying that the burnout, alarm 1 and alarm 2 of the M Series with address number 01

are to be monitored.

(This command simply specifies the registers to be monitored.)

[Command]

[STX]01010BRS03I0007,I0001,I0002B9[ETX][CR]

OK is returned in response to the above command.

[Response]

[STX]0101OK5C[ETX][CR]

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Commentaires sur ces manuels

Pas de commentaire

Yokogawa JUXTA M Series Digital Limit Alarms MVTK Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Yokogawa JUXTA M Series Digital Limit Alarms MVTK