Yokogawa ISC40 Inductive Conductivity Sensor Manuel d'utilisateur télécharger pdf (Page 32)

IM 12D8J2-E-E

Alternative ways of mounting the immersion fitting are:

• Guide pipe

To facilitate this type of mounting the immersion fitting has a larger diameter at the top.

The user supplied guide pipe (internal diameter > 52 mm) is fitted to the wall or mounting

rail. The immersion fitting slides into this guide pipe and therefore the sensor can be easily

removed for inspection.

• Platform mounting

Sometimes there is a walking platform that can be used to mount the immersion fitting.

The top of the immersion fitting has a larger diameter than the shaft. The only thing to do

is to drill a precise hole in the platform to slide the fitting through.

11.3 Dimensions ISC40FD

Dimensions in mm (inches)

42 (1.65)

ø60 (2.5)

ø50 (2)

ø51 (2)

Fig 26: Protection hose,

option /PH5, /PH10

Fig 25: Immersion fitting ISC40FD

L* see modelcode for available insertion

lengths

1 2 ... 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Yokogawa ISC40 Inductive Conductivity Sensor Manuel d'utilisateur Page 32