Yokogawa 202 Field Mounting Rate Totalizer Manuel d'utilisateur télécharger pdf (Page 43)

Installation

9.3 REMOVING THE FRONT PANEL

The front panel should be removed as follows:

1. Remove the top and bottom cover strips (ie. the dark plastic strip) by

levering a screwdriver under one end.

2. Undo the screws retaining the front. Do not remove the screws, they are

retained by O-rings.

3. Remove the front panel from the housing.

To replace the front cover, follow the above procedure in reverse. Ensure that the

front panel is aligned at connector points before tightening the screws.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Yokogawa 202 Field Mounting Rate Totalizer Manuel d'utilisateur Page 43