Yokogawa DAQWORX Manuel d'utilisateur

User’sManualWX104DAQEXPLORERIM WX104-01E10th Edition

ixIM WX104-01E123456789IndexContentsInput Type (Mode and Range/Type) ...

5-4IM WX104-01E5.2 Setting the Measurement ChannelsSelect this tabDouble-click to set the channelDifference computationScaleSquare rootSelect the inp

5-5IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexInput Type (Mode and Range/Type)Select from the list of choices from the pull-down

5-6IM WX104-01EAlarmFour alarms (Alarm 1 to 4) can be specified on each channel.TypeSelect H, L, h, l, R, T or t. T or t is selectable when the style

5-7IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexGraphDivisionsSelect the number of bar graph divisions.Bar graphSelect the referen

5-8IM WX104-01EClick to display the setting item selection screen, then select the setting items you wish to copy.The setting item selection screen th

5-9IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789Index5.3 Setting the Computation ChannelsDouble-click when setting each channelSelect

5-10IM WX104-01EDisplay SpanSets the upper and lower limits of the display.The range is from -9999999 to 99999999. Set the number of digits to the ri

5-11IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexSetting One Computation Channel at a Time2. The channel setting dialog box opens.

5-12IM WX104-01E5.4 Configuring the SettingsScreen DisplaySelect this tabSelect the time per 1 divisionSelect the display format of the trend and bar

5-13IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexMessage/FileClick here (also selectable from [Setting] - [SET [Regular] Setting])

xIM WX104-01EContentsManual Sample ...

5-14IM WX104-01EGroup/Trip LineClick here (also selectable from [Setting] - [SET [Regular] Setting])Select the tab of the group to be configured.Check

5-15IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexSetting the View Group (DX200, MV200 Only)Click here (also selectable from [Setti

5-16IM WX104-01E5.5 Configuring the Setup ModeAlarm/Relay/Remote2. Click here (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])1.

5-17IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexScan Interval/MemorySet these parameters when the data type is set to [EVENT &

5-18IM WX104-01EChannel (Setting the Burnout and RJC)Click here (also selectable from [Setting] - [SETUP [Basic] Setting] - [Setting])Set to the posit

5-19IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexKey Lock/LoginClick here (also selectable from [Setting] - [SETUP [Basic] Setting

5-20IM WX104-01ETimer (Option)Click here (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])Select oneReset computation when a timeou

5-21IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexReport (Creating Hourly/Daily/Weekly/Monthly Reports)Set the date and time at whi

5-22IM WX104-01ESetting the Temperature, Tag, Memory Alarm Time, Displayed Language, and Partial Expanded Display Click either one (also selectable

5-23IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexNetworkTCP/IP SettingsConnect the CX to the Ethernet and, in the dialog box below

xiIM WX104-01E123456789IndexContentsPartial ...

5-24IM WX104-01EModbus Master SettingsWhen using the CX as a Modbus master, enter the Modbus master basic and command settings. For details about the

5-25IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexWeb Server SettingsWhen using Ethernet communications, the CX can be set up as a

5-26IM WX104-01E5.6 Adjusting the Setup Data (Checking the Data) 2. If the data are not consistent, the following dialog box opens.1. Click here ([

5-27IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789Index5.7 Sending the Setup Data to the DX/MVThe method used to send the data varies d

5-28IM WX104-01E5.8 Checking the System Configuration and Initializing Setup DataChecking the System ConfigurationOn the DX/MV Configurator of the co

5-29IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789Index5.9 Saving the Setup Data 2. The [Save As] dialog box opens.Set the destinatio

5-30IM WX104-01E5.10 Printing the Setup DataSetting the Printer1. Select [File] - [Print Setup]. 2. Set the printer, paper and orientation.NoteSe

5-31IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789Index5.11 Characters that can be UsedThe characters in the following table can be use

6-1IM WX104-01E123456789IndexConfiguring the DX1000/DX20006.1 Starting the ConfiguratorThe following two types of files can be opened using the Confi

6-2IM WX104-01EStarting the ConfiguratorTo create a new setup data file apart from the connected DX1000/DX2000, double-click the CONFIG icon on the DA

xiiIM WX104-01EContentsUser Key/Daylight Saving ... 8-6

6-3IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Creating Setup Data by Configuring a New System2. The [System Configuration] dialog box

6-4IM WX104-01E6.2 Setting the Measurement Channels, Ext. ChannelsEnter external input channel settings in the same manner as those of the measuremen

6-5IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Input Type (Mode and Range/Type)Correspondence between difference computation, scaling, and

6-6IM WX104-01ERef. CHThe reference channel for difference computation.Square RootComputes and displays the square root of the input. This setting ca

6-7IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Selectable Range of Input and Output Values• Channels on which linear scaling is specified

6-8IM WX104-01EMoving AverageTo use the moving average, select the sampling count [Times] (2 to 400).Tag and Tag No.You can use the tag instead of the

6-9IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Partial (Partial Expanded Display)Bound position (%)Set the boundary for the partial expande

6-10IM WX104-01EAlarm MarkDisplays marks indicating the values of the high and low limit alarms, delay high and low limit alarms, and difference high

6-11IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Copying and Pasting Settings1. Select the copy source numbers (the [CH] row in this figure

6-12IM WX104-01ESetting One Channel at a Time 2. The channel setting dialog box opens.1. Double-click the channel you wish to set.Set the maximum po

1-1IM WX104-01EBefore Use123456789Index1.1 DAQEXPLORER OverviewThe DAQEXPLORER consists of the following four software programs:• DAQ Desktop• Data

6-13IM WX104-01E123456789IndexConfiguring the DX1000/DX20006.3 Setting the Computation ChannelsDouble-click when setting each channelSelect this tabS

6-14IM WX104-01ETurning Computation ON/OFFSet whether or not to perform computation for each computation channel.Entering ExpressionsEnter an expressi

6-15IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Rolling AverageON/OFFTo take the rolling average of the measured results, select [ON].Inter

6-16IM WX104-01ESetting One Computation Channel at a Time 2. The channel setting dialog box opens.1. Double-click the channel you wish to set.Select

6-17IM WX104-01E123456789IndexConfiguring the DX1000/DX20006.4 Entering General SettingsSummer Time Start Time and End TimeSet the date and time at

6-18IM WX104-01EUseTurn On the groups you want to use.Group nameSet the group name. (up to 16 characters)Channel ConfigurationSet up to 10 channels (D

6-19IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Trend interval [/div]Select the time corresponding to 1 division of the time axis on the tr

6-20IM WX104-01EMessage directionSet the display direction of messages to [Horizontal] or [Vertical]. When the trend is set to Vertical, the message

6-21IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Historical Trend BackgroundSelect the background color of the historical trend display from

6-22IM WX104-01EView GroupSet the screens that will be displayed in the 4 panel display. This function is for the DX2000 only.With revision R7.21 or l

1-2IM WX104-01EData MonitorMonitor the RECORDER data using a PC connected to the network by viewing the trend waveform, for example. The following ty

6-23IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Message Enter a message to be written to the group of up to 32 alphanumeric characters. C

6-24IM WX104-01EComment text block• Number and Line You can register text strings to Comment text blocks. Register comments to comment text blocks b

6-25IM WX104-01E123456789IndexConfiguring the DX1000/DX2000CH No. and LevelYou can assign alarms to annunciator windows by specifying channel numbers

6-26IM WX104-01EMatch Time TimerSet the time match condition used in event action. You can set the time condition that is used by the event action fun

6-27IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Manual SampleOn a DX2000 with the external input channel (/MC1) option, specify the channel

6-28IM WX104-01EEvent Action Event Action No. You can set up to 40.EventThe condition to execute the action.Settings DescriptionNONE Not use.Remote

6-29IM WX104-01E123456789IndexConfiguring the DX1000/DX2000ActionThe action to be executed when an event occurs.Settings DescriptionMemory Start/Stop

6-30IM WX104-01EFileWhen the multi batch function (/BT2 option; release 3 or later) is disabled When the multi batch function (/BT2 option; release

6-31IM WX104-01E123456789IndexConfiguring the DX1000/DX2000File nameSet the user-assigned section of the file name. (Up to 16 characters)Symbols that

6-32IM WX104-01ECustom MenuYou can show or hide items on the menu that appears when you press the FUNC key and on the display selection menu, which ap

1-3IM WX104-01EBefore Use123456789Index1.2 System RequirementsOperating SystemRun DAQWORX under any of the following operating systems. • Windows 20

6-33IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Web Report (Release number 3 or later) Slider to adjust the size of the top and bottom di

6-34IM WX104-01E6.5 Entering Basic SettingsEnvironmentBasic Environment • Data KindSettings DescriptionDisplay Records display data.E+D Records di

6-35IM WX104-01E123456789IndexConfiguring the DX1000/DX2000• Date formatSettings Display ExampleY/M/D 2005/11/30M/D/Y 11/30/2005D/M/Y 30/11/2005D.M.Y

6-36IM WX104-01EDetail Setting • TagSettings DescriptionTag Displays tags or tag numbers. Channel numbers are displayed for channels that do not ha

6-37IM WX104-01E123456789IndexConfiguring the DX1000/DX2000• Digit of lot number Select the number of digits of the lot number from 4, 6, or 8. Sel

6-38IM WX104-01E• Key SecuritySettings DescriptionLogin Enables only registered users to operate the DX using keys. The [User registration] is displ

6-39IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Settings DescriptionOver Uses the overflow data as-is.Skip Discards the overflow data and c

6-40IM WX104-01EAlarm ReflashTo set the reflash operation on the alarm output relay, select [ON]. The reflash function is set on the first three ou

6-41IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Internal Switch ANDSelect the internal switches that are to operate using AND logic. Set t

6-42IM WX104-01EAlarm action• No Logging Select [ON] to hide alarm indication. The [Detect] setting is enabled in the Measure channel, Math channel,

1-4IM WX104-01ECommunication CardAn Ethernet card supported by Windows. The TCP/IP protocol must also be installed.PrinterPrinter supported by Window

6-43IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Scan Interval Scan intervalSelect the scan interval. You cannot select fast sampling mode

6-44IM WX104-01EMeasure Function Burnout Settings DescriptionOFF Sensor disconnections are not detected.UP When the sensor burns out, the measured r

6-45IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Report Click to display the channel selection screen. Channel selection screenClick the c

6-46IM WX104-01ERemote (Release number 3 or later) NumberRemote control terminal numbers. The number of settings that appears corresponds to the num

6-47IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Key Lock Enabled when [Key Security] is set to [Keylock] under [Environment] - [Detail Se

6-48IM WX104-01EUser RegistrationYou can set the [User Registration] when [Login] is selected as [Key Security] or [Comm. Security] under [Environment

6-49IM WX104-01E123456789IndexConfiguring the DX1000/DX2000UserUp to 30 names can be registered. Click to display a dialog box for selecting items to

6-50IM WX104-01EEthernetTCP/IP Set the IP address to a fixed IP address or obtain it automatically (DHCP).Consult with your network administrator fo

6-51IM WX104-01E123456789IndexConfiguring the DX1000/DX2000When obtaining the IP address from DHCP• DHCP Set [DHCP] to [ON].• DNS accession To aut

6-52IM WX104-01EFTP FTP Transfer FileThe data files are automatically transferred to the FTP destination.File Type DescriptionDisplay data file Data

1-5IM WX104-01EBefore Use123456789Index1.3 Configuring the NetworkThe network must be configured so that the RECORDER and the PC can communicate prop

6-53IM WX104-01E123456789IndexConfiguring the DX1000/DX2000• Account Enter the account (ID) for accessing the FTP server using up to 32 alphanumeric

6-54IM WX104-01EMODBUS Client Communication intervalSet the read cycle to 125ms, 250ms, 500ms, 1s, 2s, 5s, or 10s.Auto recoverySet the interval for

6-55IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Command setting• Client command No. Select from 1 to 16 for the transmitted command numbe

6-56IM WX104-01EE-mail Set the SMTP server and mail address.• SMTP server name Enter the host name or IP address of the SMTP server.• Port No. U

6-57IM WX104-01E123456789IndexConfiguring the DX1000/DX2000POP3 settings (Release number 3 or later)• POP3 Server name and Port number Enter the POP

6-58IM WX104-01EScheduled Settings Specify the settings for sending e-mail at scheduled times.• Recipient1 and Recipient2 Set the e-mail recipient

6-59IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Report Settings Specify the settings for sending e-mail when reports are created.• Recip

6-60IM WX104-01EServer Function • Use Select [Use] or [Not] (don’t use).• Web server Use For the Web item under Server, select [Use] or [Not] (d

6-61IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Connect limits (Release number 3 or later) Modbus Server• Connect limits Select [ON] to

6-62IM WX104-01ESerial For RS-232• Baud Rate Select 1200, 2400, 4800, 9600, 19200, or 38400 (bps).• Parity Set the parity check method to Odd, E

1-6IM WX104-01EWith the MV1000Enter an IP address and host settings with the following procedure. • Press the MENU key, then click Menu tab > Basi

6-63IM WX104-01E123456789IndexConfiguring the DX1000/DX2000Modbus master Modbus master settings are enabled when you set [Protocol] to [Master] unde

6-64IM WX104-01E• Start channel/End channel (master channel numbers) Enter the rst and last channel numbers of input/output. The range of channels

6-65IM WX104-01E123456789IndexConfiguring the DX1000/DX20006.6 Sending the Setup Data to the DX1000/DX2000The method used to send the data varies dep

6-66IM WX104-01E6.7 Checking the System Configuration and Initializing Setup DataChecking the System ConfigurationOn the DX1000/DX2000 Configurator o

6-67IM WX104-01E123456789IndexConfiguring the DX1000/DX20006.8 Saving the Setup DataChanged settings can be saved on the PC with the procedure below.

6-68IM WX104-01E6.9 Printing the Setup DataSetting the Printer1. Select [File] - [Print Setup]. 2. Set the printer, paper and orientation.NoteSet

6-69IM WX104-01E123456789IndexConfiguring the DX1000/DX20006.10 Characters that can be UsedList of Input TypesType Allowed Characters ItemAlphanumeri

7-1IM WX104-01E123456789IndexConfiguring the MV1000/MV20007.1 Starting the Hardware Configurator (Opening the Hardware Configurator Window)The follow

7-2IM WX104-01EStarting the ConfiguratorTo create a new setup data file apart from the connected MV1000/MV2000, double-click the CONFIG icon on the DA

7-3IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Creating Setup Data by Configuring a New System2. The [System Configuration] dialog box

iIM WX104-01EThank you for purchasing the DAQEXPLORER.This manual explains the operating procedures of the DAQEXPLORER on Windows 2000, Windows XP, an

2-1IM WX104-01E123456789IndexUsing the DAQ Desktop2.1 Starting and Exiting the DAQ DesktopStarting the DAQ Desktop1. From the Start menu, select [Pr

7-4IM WX104-01E7.2 Setting the Measurement Channels, Ext. ChannelsEnter external input channel settings in the same manner as those of the measuremen

7-5IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Input Type (Mode and Range/Type)Correspondence between difference computation, scaling, and

7-6IM WX104-01ELow-cut (Can be set when the mode is 1-5V, and when the mode is VOLT with square root (SQRT) selected. )Select [ON] to use the low-cut

7-7IM WX104-01E123456789IndexConfiguring the MV1000/MV2000AlarmFour alarms (Alarm 1 to 4) can be specified on each channel.TypeSelect H, L, h, l, R, r

7-8IM WX104-01EMoving AverageTo use the moving average, select the sampling count [Times] (2 to 400).TagUp to 16 characters can be entered for the tag

7-9IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Partial (Partial Expanded Display)Bound position (%)Set the boundary for the partial expande

7-10IM WX104-01EAlarm MarkDisplays marks indicating the values of the high and low limit alarms, delay high and low limit alarms, and difference high

7-11IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Setting One Channel at a Time 2. The channel setting dialog box opens.1. Double-click the

7-12IM WX104-01EDouble-click when setting each channelSelect this tabSet the rolling averageSet the TLOG computationEnter the tagDisplay zoneSet the g

7-13IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Use (Turning ON/OFF Computation)Select whether or not to perform computation for each chann

2-2IM WX104-01ENote• If there are multiple RECORDERs that have the Ethernet login configured, only the RECORDER with the matching user name and passw

7-14IM WX104-01ERolling AverageON/OFFTo take the rolling average of the measured results, select [ON].IntervalSelect the sampling interval when taking

7-15IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Setting One Computation Channel at a Time 2. The channel setting dialog box opens.1. Doub

7-16IM WX104-01E7.3 Setting the Computation ChannelsDouble-click when setting each channelSelect this tabSet the rolling averageSet the TLOG computat

7-17IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Use (Turning ON/OFF Computation)Select whether or not to perform computation for each chann

7-18IM WX104-01ERolling AverageON/OFFTo take the rolling average of the measured results, select [ON].IntervalSelect the sampling interval when taking

7-19IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Setting One Computation Channel at a Time 2. The channel setting dialog box opens.1. Doub

7-20IM WX104-01E7.4 Entering General SettingsSummer Time On/Off To switch between summer time and standard time, select [On].Start Time Specify t

7-21IM WX104-01E123456789IndexConfiguring the MV1000/MV2000UseTurn On the groups you want to use.Group nameSet the group name. (up to 16 characters)Ch

7-22IM WX104-01ETrend interval [/div]Specify the trend/storage interval (sampling interval and recording interval) in terms of time per division on th

7-23IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Bar Graph DirectionSelect Bar graph direction.BrightnessSelect a value from 1 to 6 (2 by de

2-3IM WX104-01E123456789IndexUsing the DAQ DesktopRecycle iconDeletes files and folders and dismounts the RECORDER.VIEWER icon Starts the Data Viewer

7-24IM WX104-01EView GroupSet the screens that will be displayed in the 4 panel display. This function is for the MV2000 only.With revision R7.21 or l

7-25IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Message Enter a message to be written to the group of up to 32 alphanumeric characters. 7

7-26IM WX104-01ETimer Changes the upper/lower display areaTimerTimer used by event action. Used also in the TLOG computation of the computation fun

7-27IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Match Time TimerSet the time match condition used in event action. These timers are also us

7-28IM WX104-01EEvent Action Event Action No.You can set up to 40.EventThe condition to execute the action.Settings DescriptionNONE Not use.Remote S

7-29IM WX104-01E123456789IndexConfiguring the MV1000/MV2000File Directory nameSet the name of the directory on the storage medium for saving the dat

7-30IM WX104-01EEvent Date Event related settings are enabled when [Data Kind] is set to [E+D] or [Event] in [Basic Environment] under [Environment]

7-31IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Custom MenuMenuThe display selection menu appears when the DISP/ENTER key is pressed. Del

7-32IM WX104-01E7.5 Entering Basic SettingsEnvironmentBasic Environment • Data KindSettings DescriptionDisplay Records display data.E+D Records di

7-33IM WX104-01E123456789IndexConfiguring the MV1000/MV2000• Service port The following table indicates the number of simultaneous uses (number of u

2-4IM WX104-01ENetwork folderThe network folder will list the mountable RECORDERs that are within the same segment.The RECORDER icons that have alread

7-34IM WX104-01E• Batch Select [ON] to use the batch function.• Digit of lot number Select the number of digits of the lot number from 4, 6, or 8.

7-35IM WX104-01E123456789IndexConfiguring the MV1000/MV2000• Auto SaveSettings DescriptionON Automatically saves the measured data to the CF card.OFF

7-36IM WX104-01E• File kind Set this item when creating two types of reports such as daily report and monthly report.Settings DescriptionSplit Saves

7-37IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Relay holdSelect the alarm output relay behavior from below: The setting applies to all rel

7-38IM WX104-01EMeasure Function Burnout Settings DescriptionOFF Sensor disconnections are not detected.UP When the sensor burns out, the measured r

7-39IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Report Click to display the channel selection screen. Channel selection screenClick the c

7-40IM WX104-01EKey Lock Enabled when [Key Security] is set to [Keylock] under [Environment] - [Detail Setting] in the [Basic Setting] tab. Password

7-41IM WX104-01E123456789IndexConfiguring the MV1000/MV2000User RegistrationYou can set the [User Registration] when [Login] is selected as [Key Secur

7-42IM WX104-01EUserUp to 30 names can be registered. Changes the upper/lower display area• Mode The available settings vary depending on the [Se

7-43IM WX104-01E123456789IndexConfiguring the MV1000/MV2000EthernetTCP/IP Set the IP address to a fixed IP address or obtain it automatically (DHCP)

2-5IM WX104-01E123456789IndexUsing the DAQ DesktopOpening the DX/MV/CX Folder2. The DX/MV/CX folder opens.DX/MV/CX folderStart/Stop the data acquisiti

7-44IM WX104-01EWhen obtaining the IP address from DHCP• DHCP Set [DHCP] to [ON].• DNS accession To automatically obtain the DNS server address, s

7-45IM WX104-01E123456789IndexConfiguring the MV1000/MV2000FTP The data files are automatically transferred to the FTP destination.File Type Descrip

7-46IM WX104-01E• Initial Path Enter the directory of the le transfer destination using up to 64 alphanumeric characters. The delimiter for direct

7-47IM WX104-01E123456789IndexConfiguring the MV1000/MV2000MODBUS Client Changes the upper/lower display areaClick to display the channel selection

7-48IM WX104-01ECommand setting• Client command No. Select from 1 to 16 for the transmitted command numbers to be congured.• Command Set the comm

7-49IM WX104-01E123456789IndexConfiguring the MV1000/MV2000E-mail Basic SettingSet the SMTP server and mail address.• SMTP server name Enter the h

7-50IM WX104-01E• Login method To send the POP3 server login password without encryption, set POP3 Login to [PLAIN]. To send the password with encry

7-51IM WX104-01E123456789IndexConfiguring the MV1000/MV2000System Specify the settings for sending e-mail when the MV recovers from a power failure,

7-52IM WX104-01ESNTP Client • Use Select [Use] to use the SNTP client function; Otherwise, select [Not]. If you select [Use], the SNTP client set

7-53IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Server Function • Use Select [Use] or [Not] (don’t use).• Web server Use For the Web

2-6IM WX104-01E2.2 Starting and Stopping Data Acquisition on the DX/MV/CX, Send a Trigger Click here (start)Indicates that the data acquisition is

7-54IM WX104-01ESerial For RS-232• Baud Rate Select 1200, 2400, 4800, 9600, 19200, or 38400 (bps).• Parity Set the parity check method to Odd, E

7-55IM WX104-01E123456789IndexConfiguring the MV1000/MV2000Modbus master Click to display the channel selection screen Modbus master settings are en

7-56IM WX104-01E• Address Enter the address of the slave device in the range of 1 to 247.• Register Set the register number of the server. For an

7-57IM WX104-01E123456789IndexConfiguring the MV1000/MV20007.6 Sending the Setup Data to the MV1000/MV2000The method used to send the data varies dep

7-58IM WX104-01E7.7 Checking the System Configuration and Initializing Setup DataChecking the System ConfigurationOn the MV1000/MV2000 Configurator o

7-59IM WX104-01E123456789IndexConfiguring the MV1000/MV20007.8 Saving the Setup DataChanged settings can be saved on the PC with the procedure below.

7-60IM WX104-01E7.9 Printing the Setup DataSetting the Printer1. Select [File] - [Print Setup]. 2. Set the printer, paper and orientation.NoteS

7-61IM WX104-01E123456789IndexConfiguring the MV1000/MV20007.10 Characters that can be UsedList of Input TypesType Allowed Characters ItemAlphanumeri

8-1IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.1 Starting the Hardware Configurator (Opening the Hardware Configurator Window)Starting t

8-2IM WX104-01EOpening the CX Configurator by Configuring a New SystemIf you wish to create a new setup data file independent from the connected CX, d

2-7IM WX104-01E123456789IndexUsing the DAQ DesktopWhen the Multibatch Function Is Included Select one item for recording or math start, fill in the

8-3IM WX104-01E123456789IndexConfiguring the CX1000/CX2000• Option The following options can be selected if you set the style to Style2 or earlier.

8-4IM WX104-01E8.2 Checking the System and Initializing Setup DataChecking the SystemOn the Hardware Configurator of the connected CX, selecting [Sys

8-5IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.3 Control Function Basic SettingsMake the basic settings of control function.To do so, cl

8-6IM WX104-01ECLOG Error (CX Style Number S3 or Later)Set the error handling when the channel data for CLOG, which is an operator for PV/SP math and

8-7IM WX104-01E123456789IndexConfiguring the CX1000/CX2000• AUX Remote Setting When performing measurements by remote, select [Remote]. When [Cont

8-8IM WX104-01E[Burnout/Tuning] Tab • Input Process Burnout For the measurement input to each loop, select the burnout direction (open-circuit de

8-9IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Contact Input Module SettingSelect the terminal blocks where you want to register contact

8-10IM WX104-01ESP No. Selection SourceWhen specifying input contacts of SP No. settings, select the loop number of the SP Number set to be switched.

8-11IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Control Relay Module SettingSelect the terminal blocks where you want to register contact

8-12IM WX104-01EExternal LoopFor each loop there are Basic Setting, External Loop Setting, Parameter Address Setting, and Tuning Setting items.[Basic

2-8IM WX104-01E Click here (send a trigger)TriggerSends the trigger signal used to store the event data to the internal memory. The trigger is vali

8-13IM WX104-01E123456789IndexConfiguring the CX1000/CX2000 TagSpecify a tag using a maximum of 8 characters. Tag Comment Specify a tag comment usi

8-14IM WX104-01E[Tuning Setting] Tab • Tuning Setting (External) Tuning item ON/OFF Select [On] for the parameters that you want to display in th

8-15IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.4 Control Function General SettingsMake settings for the internal loop control functions

8-16IM WX104-01EMode (PV1, PV2, Remote)Select the channel input mode from [VOLT], [TC], or [RTD]. When [SCALE/1.5V] is set to [1.5V], [Mode] is set t

8-17IM WX104-01E123456789IndexConfiguring the CX1000/CX2000NoteWhen the PV/SP math function is ON, the input settings are entered using [Control input

8-18IM WX104-01EPV Range (PV or PV1)Set the maximum value, minimum value, decimal point position (0 to 4), and unit (up to 6 alphanumeric characters).

8-19IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Exp.Enter the retransmission expression.Output SpanSet the maximum value, minimum value, de

8-20IM WX104-01E• PID Parameters Specify the PID parameters for each loop. Target setpoint Specify the target setpoint in EU (0.0 to 100.0%). Set

8-21IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Operation Related • Operation Related Make the internal loop control operation related

8-22IM WX104-01E Reference Deviation Turn the reference deviation on or off, and specify the value with the measurement input span one-digit EUS (10

2-9IM WX104-01E123456789IndexUsing the DAQ Desktop2.3 Using the Snap Shot FunctionDX/MV/CX folderExpand or reduce the size of the snap shot screenTak

8-23IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Control Function Settings SP TrackingTurn the target setpoint tracking ON or OFF.PV Track

8-24IM WX104-01EKINDSelect the loops numbers, measurement channel numbers, or DIO numbers (Style 3 or later) you want to assign to a Group. For the C

8-25IM WX104-01E123456789IndexConfiguring the CX1000/CX2000DI NumSet the DI number to be monitored.TagSet the tag.Enter up to eight alphanumeric chara

8-26IM WX104-01EControl Input (CX Style Number S3 or Later)When PV/SP math is ON, set [Input Range] and [Linearizer] for each channel.[Input Range] ta

8-27IM WX104-01E123456789IndexConfiguring the CX1000/CX2000• Bias (PV1/2 or Remote) Turns ON/OFF the use of the bias. When it is ON, set the value

8-28IM WX104-01E8.5 Control Channel Settings (Internal/External)The following settings apply to the internal and external loops' SP, PV, and OUT

8-29IM WX104-01E123456789IndexConfiguring the CX1000/CX2000PartialExpand(%)The boundary value is displayed as a percentage along the width of the disp

8-30IM WX104-01E8.6 Program Control Related Setup OperationsTurn ON/OFF Program ControlProgram control can be turned ON and OFF using the internal lo

8-31IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Initial Program PatternsYou can set the default program patterns by clicking the [Program p

8-32IM WX104-01EStart target setpointSet the start SP, a starting condition, in the range of [EU (0.0% to 100.0%)] (initial value is 0%) of the measur

2-10IM WX104-01E2.4 Confirming the RECORDER DataConfirming the Data DX/MV/CX folder 1. Double-click here.Reload the dataCopy the selected files to

8-33IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Program Pattern Setting (Segment setting)Set a program pattern for each segment, by clickin

8-34IM WX104-01ESelect SetpointsEnter a program pattern for each segment. Click this tabLoop numberStart setpoint (Set in [Default setting])The ta

8-35IM WX104-01E123456789IndexConfiguring the CX1000/CX2000• Wait action Set the wait action type to [Shift] or [Within]. To disable the wait actio

8-36IM WX104-01ETime EventSet the Time Event. Click this tab• On1/On2/On3/Off Set the ON/OFF setting type of each event (16 events) from the follo

8-37IM WX104-01E123456789IndexConfiguring the CX1000/CX2000PV Event (CX Style Number S3 or Later)Set the PV event hysteresis in the range of [0.0] to

8-38IM WX104-01EPV Event-Relay output, Time Event-Relay output, and Program pattern end signal• Output Turn OFF/ON the control relay output.• Numbe

8-39IM WX104-01E123456789IndexConfiguring the CX1000/CX2000AUX (Automatic Message, Display Position)Turn message display ON/OFF, and set the loop disp

8-40IM WX104-01E8.7 Basic Measurement Function SettingsTo enter basic measurement function settings, click the [Setup] tab. Or, you can select the i

8-41IM WX104-01E123456789IndexConfiguring the CX1000/CX2000• Rate of Change Increase Select the number of data samples that determines the interval

8-42IM WX104-01EMemory Sample (save method of measured/computed data)• Save Select the save method of internal memory data to an external storage me

iiIM WX104-01ESoftware License AgreementIMPORTANT - PLEASE READ CAREFULLY BEFORE INSTALLING OR USING:THANK YOU VERY MUCH FOR SELECTING SOFTWARE OF YOK

2-11IM WX104-01E123456789IndexUsing the DAQ Desktop• Display example when details is selectedDisplays whether the data are of the internal memory or

8-43IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Memory TimeupWhen the [Save] is set to [Auto] in [Memory Save], specify the date and time o

8-44IM WX104-01ECopying and Pasting Setup DataYou can copy the setup data of one channel or more to other channels. Use the following procedure to co

8-45IM WX104-01E123456789IndexConfiguring the CX1000/CX2000• User ID Specify whether you want to use a user ID when logging in. When selected, you

8-46IM WX104-01EReport (Creating Hourly/Daily/Weekly/Monthly Reports, Setting Available when the Computation Function Option is Active.)Set the date a

8-47IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Copying and Pasting Setup DataYou can copy the setup data of one channel or more to other c

8-48IM WX104-01ETemperature UnitSet the temperature unit from [C](Celsius) or [F](Fahrenheit). 1. Click here. (Or choose the [Setting] menu - [SETUP

8-49IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.8 Measurement Channels SettingsTo enter measurement channel settings, click the [Meas] t

8-50IM WX104-01EInput Type (Mode and Range/Type)Select from the pull-down list.Mode Relevant SettingsVOLT (voltage) Range, span L, and span UTC (therm

8-51IM WX104-01E123456789IndexConfiguring the CX1000/CX2000AlarmFour alarms (Alarm 1 to 4) can be specified on each channel.TypeSelect H, L, h (dH), l

8-52IM WX104-01EGraphDivisionsSelect the number of bar graph divisions.Bar graphSelect the reference position of the bar graph. Selecting [Center] wh

2-12IM WX104-01E2.5 Automatically Transferring Data in the DX/MV/CXSetting the Automatic Transfer DestinationDX/MV/CX folder2. The folder name is set

8-53IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Setting One Channel at a Time2. Click the tab of the item to be set.3. After setting the it

8-54IM WX104-01E8.9 Computation Channel SettingsTo enter computation channel settings, click the [Math] tab. Or, you can choose [Setting] - [SET [Re

8-55IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Display SpanSet the upper and lower limits of the display.The range is –9999999 to 99999999

8-56IM WX104-01ESetting One Computation Channel at a Time1. Double-click the channel to set to open the Channel Settings dialog box2. Click the ta

8-57IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Copying and Pasting Setup DataYou can copy the setup data of one channel or more to other c

8-58IM WX104-01E8.10 Display SettingsTo enter display settings, click the [Setting] tab. Or, you can select the items by choosing [Setting] - [SET [

8-59IM WX104-01E123456789IndexConfiguring the CX1000/CX2000Message/FileClick here. (Or choose the [Setting] menu - [SET [Regular] Setting].)Specify a

8-60IM WX104-01EGroup/Trip LineClick here. (Or choose the [Setting] menu - [SET [Regular] Setting].)Click the tab of the group to be configured.Select

8-61IM WX104-01E123456789IndexConfiguring the CX1000/CX2000View GroupClick here. (Or choose the [Setting] menu - [SET [Regular] Setting].)Specify a vi

8-62IM WX104-01EUser Key/Daylight Saving Click one. (Or choose the [Setting] menu - [SET [Regular] Setting].)Select the function to be assigned to t

2-13IM WX104-01E123456789IndexUsing the DAQ DesktopSelecting the Files to be Automatically Transferred2. The [Property] dialog box opens.Automaticall

8-63IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.11 Network SettingsTo make network settings, click the [Setup] tab, then select the [Net

8-64IM WX104-01ESerial Communication SettingsWhen using serial communications between the CX and other devices, set the parameters required for serial

8-65IM WX104-01E123456789IndexConfiguring the CX1000/CX2000FTP SettingsUsing the FTP function, measurement/calculation data can be automatically trans

8-66IM WX104-01EE-mail Transmission SettingsWhen using e-mail transmission, specify [SMTP server name], [Port number], [Recipient1], etc. For details

8-67IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.12 Setup Data Adjustment 2. If the data is not consistent, the following dialog box op

8-68IM WX104-01E8.13 Sending the Setup Data to the CXThe method used to send the data varies depending on whether a CONFIG file or setup data file is

8-69IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.14 Saving the Setup Data 2. The [Save As] dialog box opens.Specify the destination and

8-70IM WX104-01E8.15 Printing the Setup DataPrinter Settings1. Select [File] - [Print Setting]. 2. Set the printer, paper and orientation.NoteSet

8-71IM WX104-01E123456789IndexConfiguring the CX1000/CX20008.16 Usable CharactersThe characters in the following table can be used when entering grou

9-1IM WX104-01EError Messages and Their Corrective Actions123456789Index9.1 Error Messages and Their Corrective ActionsSoftware CommonMessageMessageF

2-14IM WX104-01EAutomatic File ConvertYou can automatically convert an automatically-transferred file to create a file in ASCII, Lotus, or Excel forma

9-2IM WX104-01EData ViewerError MessageNo. Message Corrective ActionE3106 Data does not exist. Select another file.E3107 Channel dose not exist. Selec

9-3IM WX104-01EError Messages and Their Corrective Actions123456789IndexWarning MessageNo. Message Reference Page, Reference SectionW3435 System setti

Index-1IM WX104-01EIndexIndexSymbols+Over ... 7-35–Over ...

Index-2IM WX104-01EIndexDAQ Desktop, starting ... 2-1data, confirmation of ...

Index-3IM WX104-01EIndexlanguage ...5-22, 6-36, 7-33, 8-47level ...

Index-4IM WX104-01EIndexreport channel... 5-21report groups ...

Index-5IM WX104-01Eview groups ...5-15, 6-22, 7-24, 8-61view kind ...

2-15IM WX104-01E123456789IndexUsing the DAQ Desktop2.6 Viewing the Property and Version InformationProperty 2. The [Property] dialog box opens.1. C

2-16IM WX104-01E2.7 Confirming the Port Number Setting the Time on the DX/MV/CX 1. Select [File] - [Port No.].2. The [Port No.] dialog box opens.No

3-1IM WX104-01E123456789IndexUsing the Data Monitor3.1 Starting the Data MonitorStarting the Data Monitor (From the DX/MV/CX Folder)DX/MV/CX folderAl

3-2IM WX104-01EToolbar, monitor bar, and status barClicking [View] - [Tool Bar], [Monitor Bar], or [Status Bar] from the menu bar displays the corresp

3-3IM WX104-01E123456789IndexUsing the Data Monitor3.2 Displaying the TrendDisplaying the Trend1. Click here ([Window] - [Trend Monitor]).Select the

3-4IM WX104-01EGeneral Display Settings1. Click here ([Window] - [General Display Settings]).3. Click the tab of the group to be configured.Turn ON/OF

iiiIM WX104-01E5. Infringement5.1 If you are warned or receive a claim by a third party that the Software Product in its original form infringes any

3-5IM WX104-01E123456789IndexUsing the Data MonitorRegistering the channel 1. Click one.2. The [Channel No.] dialog box opens.3. Click one.Types of

3-6IM WX104-01EDisplay colorYou can select the color of each waveform. To create custom colors, click the [Define Custom Colors] button in the [Color

3-7IM WX104-01E123456789IndexUsing the Data MonitorZooming in or zooming out of the time axis Click either one([Time Axis] - [Zoom In]/[Zoom Out])•

3-8IM WX104-01EExamples of the Various Zone Settings• Full zone • Slide zone Full zoneSlide zone• Auto zone Auto zone• Multi-axis zone

3-9IM WX104-01E123456789IndexUsing the Data MonitorEditing zones Drag the top adjustment knobDrag the zone display barDrag the bottom adjustment kno

3-10IM WX104-01EWaveform display limit (clip)When the waveform display limit is enabled by clicking the clip icon or by selecting [Y-Axis] - [Clip], t

3-11IM WX104-01E123456789IndexUsing the Data MonitorShowing/Hiding CursorsShowing the cursor 1. Click here ([File] - [Pause]).3. Point the cursor on

3-12IM WX104-01EDisplaying Cursor’s Values1. Click here ([View] - [Display Cursor’s Values]).Alarm display (Displays the conditions of alarm 1, 2, 3,

3-13IM WX104-01E123456789IndexUsing the Data Monitor• Example of a Cascading Display • Example of a Tiled Display • Example of Arranged ico

3-14IM WX104-01E3.3 Displaying the Color GraphDisplaying the Color GraphClick here ([Window] - [Color Graph Monitor]).Connect/Disconnect the monitor

ivIM WX104-01EHow to Use this ManualStructure of the ManualThis manual consists of the following 6 chapters and an index.Chapter Title Description1 Be

3-15IM WX104-01E123456789IndexUsing the Data MonitorSetting the Time Axis and Cursor DisplaySelecting absolute or relative time display, zooming in or

3-16IM WX104-01E3.4 Displaying Numeric ValuesDisplaying Numeric Values1. Click here ([Window] - [Numeric Monitor]).Connect/Disconnect the monitor (se

3-17IM WX104-01E123456789IndexUsing the Data Monitor3.5 Displaying the MeterDisplaying the Meter 1. Click here ([Window] - [Meter Monitor]).Connect

3-18IM WX104-01EGeneral Display SettingsThe parameters in the [General Display Settings] dialog box related to the meter display are as follows:• Tur

3-19IM WX104-01E123456789IndexUsing the Data Monitor3.6 Displaying AlarmsDisplaying Alarms1. Click here ([Window] - [Alarm Monitor]).2. The alarm mon

3-20IM WX104-01ETurn ON/OFF the Alarm Sound An alarm sound can be generated when an alarm occurs. To stop the alarm sound, confirm all alarms by cl

3-21IM WX104-01E123456789IndexUsing the Data Monitor• Alarm log Displays a list of the type, the time of occurrence and release, and the channel of

3-22IM WX104-01E3.7 Circular DisplayCircular Display1. Click here ([Window] - [Circular Monitor]).Select the displayed groupConnect/Disconnect the mo

3-23IM WX104-01E123456789IndexUsing the Data MonitorSetting the Time AxisSelecting absolute or relative time display 1. Click here ([Time-Axis]).2.

3-24IM WX104-01E3.8 Connecting Communications between the Data Monitor and the DAQ DesktopConnecting Communications1. Select [File] - [New] from the

vIM WX104-01E123456789IndexContentsSoftware License Agreement ...

3-25IM WX104-01E123456789IndexUsing the Data MonitorSaving the Connection Conditions Select [File] - [Save As] or [Save]. The [Save As] dialog box

3-26IM WX104-01E3.9 Pausing the Monitor and Turning ON/OFF the LinkPausing the Monitor Click here ([File] - [Pause]).The display data are continuou

3-27IM WX104-01E123456789IndexUsing the Data Monitor3.10 Stopping Communications between the Data Monitor and DAQ Desktop and Exiting the Data Monito

4-1IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.1 Starting and Exiting the Data ViewerStarting the Data ViewerDX/MV/CX folder1. Do

4-2IM WX104-01EFiles that launch the Data ViewerThe Data Viewer starts by opening the following three types of files:• : Display data le (*.dds and

4-3IM WX104-01EDisplaying Data with the Data Viewer123456789Index• For waveform data files and event data files • For TLOG files The it

4-4IM WX104-01ETime Display When Using the DST FunctionWhen displaying data on this software’s Data Monitor or Data Viewer, the data time on the recor

4-5IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.2 Displaying the WaveformDisplaying the Waveform1. Click here ([Window] - [Graph])

4-6IM WX104-01EColor overview display Displays the waveforms that have the display turned ONDisplays marks and cursorsThe measured values of the ent

4-7IM WX104-01EDisplaying Data with the Data Viewer123456789IndexSetting the Time AxisSelecting absolute or relative time display Select [Time Axis]

viIM WX104-01EContentsDeleting Marks ...

4-8IM WX104-01ESelecting the Characters Used to Identify ChannelsYou can select the channel No. or tag as the character string used to identify the ch

4-9IM WX104-01EDisplaying Data with the Data Viewer123456789IndexDisplaying Cursor’s ValuesClicking the control icon or selecting [Window] - [Control]

4-10IM WX104-01E Displayed position: CenterDisplayed position: LeftDisplayed position: RightFlagIf you left-click the mark while pressing the “Ctrl”

4-11IM WX104-01EDisplaying Data with the Data Viewer123456789IndexDeleting Marks 1. Place Cursor A and Cursor B so that the mark is between the two.

4-12IM WX104-01E4.3 Circular DisplayCircular Display1. Click here ([Window] - [Circular]).Group selection tab (click the tab of the group you wish to

4-13IM WX104-01EDisplaying Data with the Data Viewer123456789IndexSetting the Time AxisSelecting absolute or relative time display and zooming in or z

4-14IM WX104-01E4.4 Displaying Numeric ValuesDisplaying Numeric Values1. Click here ([Window] - [Sheet]).Open a file (section 4.1)Group selection tab

4-15IM WX104-01EDisplaying Data with the Data Viewer123456789IndexSelecting the Characters Used to Identify ChannelsFor details, see “Selecting the Ch

4-16IM WX104-01E4.5 Linking Files and Saving the Link Settings FileLinking FilesYou can link and display RECORDER files that have been divided by the

4-17IM WX104-01EDisplaying Data with the Data Viewer123456789IndexFrom the menu bar7. Click here(display files for linking).5. Click here([Window]-[Li

viiIM WX104-01E123456789IndexContentsSquare Root ...

4-18IM WX104-01E4.6 Listing Alarms and Marks and Converting the ListA list of alarms and marks is displayed with the display file or event file opene

4-19IM WX104-01EDisplaying Data with the Data Viewer123456789Index 3. Click here([Ctrl Mode...])For the alarm list or the event list, click a label

4-20IM WX104-01E4.7 Displaying the Manually Sampled Data FileDisplaying the Manually Sampled Data FileDate/time of manual samplingDate/time of manual

4-21IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.8 Displaying the TLOG FileDisplaying the TLOG FileDX/MV/CX folder1. Double-click

4-22IM WX104-01ETurning ON/OFF FlagsWhen [View] - [Flags] is checked, the following status information is displayed: : Stopped TLOG computation. : T

4-23IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.9 Displaying the Report File DX/MV/CX folder1. Double-click the report file

4-24IM WX104-01E[Daily] TabDisplays daily reports in the file. [All] TabDisplays all reports in the file. 4.9 Displaying the Report File

4-25IM WX104-01EDisplaying Data with the Data Viewer123456789IndexDisplaying a Stacked Bar Graph of Report DataYou can display report data generated b

4-26IM WX104-01EExample of a Report File from a Model Other Than the DX1000/DX2000Vertical display Horizontal display : Measurement or computati

4-27IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.10 Saving the Display Settings Click here ([File] - [Save Display Setting]).The

viiiIM WX104-01EContentsRef. CH ...

4-28IM WX104-01E4.11 Saving Display TemplateSaving Templates 1. Click here [File] - [Save Template] The currently displayed settings are saved

4-29IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.12 Converting the Data 1. Select one.2. The [Conversion Details] dialog box ope

4-30IM WX104-01EStart point and end pointCursor A and Cursor B are used to set the start point and end point of the range, respectively. If Cursor A

4-31IM WX104-01EDisplaying Data with the Data Viewer123456789IndexConversion ExampleASCII conversion file Excel conversion file 4.12 Converting t

4-32IM WX104-01E4.13 PrintingSetting the Printer1. Select [File] - [Print Setup]. 2. Set the printer, paper and orientation.NoteSet the printer a

4-33IM WX104-01EDisplaying Data with the Data Viewer123456789Index4.13 PrintingIf you selected [Select Group], click the [Select] button. The [Selec

4-34IM WX104-01EHeaderA header can be printed when printing the waveform or a TLOG file.Of the items that are displayed in the file information dialog

5-1IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789Index5.1 Starting the ConfiguratorThe following two types of files can be opened using

5-2IM WX104-01EStarting the ConfiguratorDX/MV folder1. Double-click here.2. The DX/MV Configurator opens.Print (section 5.10)Data check (section 5.6)D

5-3IM WX104-01EConfiguring the DX100/DX200/MV100/MV200123456789IndexCreating Setup Data by Configuring a New System2. The [System Configuration] dialo