Yokogawa 202 Field Mounting Rate Totalizer Manuel d'utilisateur télécharger pdf (Page 29)

7.3 REMOVING THE FRONT PANEL

The front of the instrument is removed as follows:

1. Remove both the top and bottom cover strips (ie. the dark plastic strips on

the front) by levering a screwdriver under one end.

2. Undo the seven screws retaining the front. Note that the screws should

not be removed from the front panel as they are retained by O-rings.

3. Pull the front panel free from the housing.

Replacing the front panel of the instrument is the reverse procedure. However,

ensure that the front panel is aligned at both connector points before tightening

the screws.

Installation 27

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Yokogawa 202 Field Mounting Rate Totalizer Manuel d'utilisateur Page 29